Extrusion Accessories

Water Flushing

Leary’s Water Flushing system eliminates downtime related to cleaning and increases operator efficiency. This unique cleaning system uses a three-way valve at the cold glue distribution manifold allowing for quick changeovers between gluing, water flushing and off modes.

Water flushing allows users to keep glue hoses and valves clean, preventing glue buildup on the inside of the hose which could restrict flow. The system makes it easy to store water in hoses that are not in use by closing the shut-off valve until the next time the gluing station is used.

• Increase uptime and operator efficiency
• Prevents glue buildup in hoses
• Easily change between “Gluing”, “Water Flushing” and “Off” modes

Glue Pot Level Monitoring System

The glue fill controller accurately monitors the adhesive level of any glue pot. The system monitors low, high, filling and non-filling conditions. Simply mount the sensor above the glue pot and the controller does the rest.

The controller also features an LED indication of the glue pot’s condition. Low and high level states are audibly and visually indicated through the alarm outputs on the controller.

• Automatically monitors adhesive level
• Optional filling valves maintain level at 6 mm (.25 in) increments
• System uses Teflon seated guillotine valves (unaffected by harsh solvents)
• Main glue safety shut-down to eliminate over filling
• Pump feed systems also available

Low Level Glue Alarm

Leary’s low glue level alarm monitors the adhesive level of extrusion glue in a 30L bucket. Ensure product never leaves your facility without glue due to an empty bucket. Audible and visual notice on Monet controller interface or an optional compact controller with audible notice of low glue level is available.

• Monitor adhesive level of extrusion glue in 30L bucket
• Audible and visual notice on Monet interface
• Connect directly to available pattern on Array controller
• Optional compact controller with audible notice of low glue level