W.
H. Leary Company offers the only “liquid fill” detection solution that
inspects the most important and common defects found when
manufacturing a liquid fill carton. The common liquid fill inspection
options are listed below.
The
LS-916 controller integrates seamlessly with the flame seal machine to
become the new standard in inspection controllers. The controller has
16 patterns with a large 15” remote color touch screen for easy viewing.
Detection accuracy is guaranteed when running speeds of
1,000m/min (2,300 f/min) because of Leary’s patented SureScan™ and
GapPro™ technologies. Jam & Overlap detection is also integral to
the system along with multiple rejection options and our patented
RejectTrak™ technology.
The expandable LS-916 allows you to add inspection stations in the future as your needs change.
Inspection Options
Each inspection option comes with it’s own trigger to ensure that
each failure or defect is properly identified. Any sensor that detects a
failure signals the rejection device.
Detects if the skiving operation cut through the paper leaving a void in the hem.
Detects if the hem moved out of position after the hem was folded.
Detects that the fitment knockout has been removed and is cut in the correct location.
Monitors every carton for mixed product or barcodes that are not readable.
The
doubles fixture is set to the thickness of one carton and detects the
additional thickness of board and will reject or shut down the machine.
All
defective cartons are rejected in the final fold section at speeds up to
1,000MPM. Multiple failure options may be programmed into the system.
Liquid Fill Solution 
