|
Inspection Option Components |
|
W. H. Leary offers expandable detection / inspection solutions to meet the demands of your customers today and in the future. Simply invest in a controller and add your quality inspection stations as needed. Below are only a few of the most popular options. For an inspection or quality need not addressed here, send us an
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
with specifications of your application so we can help you determine the best solution. Glue Detection
· Monitors for contact, non-contact or glue wheels
· Monitors the entire glue pattern
· Scans for pattern start, end, absence, presence and skips
· Multiple light spot options
· Moisture, optical or UV scanning capability | 
Single light spot detection | |  UV24 detects each glue line individually | Short Sheet Detection 
Short Sheet inspection measures the length and the width of each box. If a box does not meet specifications it will automatically be sprayed to identify it as defective. | | Hanging Tab Detection 
Sensors are positioned to view any scrap that may be attached to the box as it enters the gluing station. With this detection station, you have the option of either shutting down the machine or rejecting the box. | Bar code & ANSI Grading 
Bar code identification and grading is also available. If the code grader does not read a value of “C” or better, the product will be rejected. | | Other Detection Options 
If there is a quality inspection option that you do not see or have questions about, send us an
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
so we can help you identify which solution best fits your needs. | Rejection Options An inspection system is only as good as its ability to reject a ‘bad’ box. Leary, with our RejectTrak™ patented technology, offers two rejection options to ensure that only good boxes get to your customers. | Spray Rejection 
| | Identifies ‘bad’ boxes with UV fugitive spray to mark defective product for manual removal. The Jet250™ atomizing spray head applies a mist which adheres to the spine of a box for easy visual identification in a bundle. May be used with stack rejection. | Stack Rejection 
| | This rejection system is used to automatically identify boxes which have been sprayed by the Jet250™. The stack arm, which automatically moves up and down, has a UV detector on it, looking for rejected boxes which have been marked with UV material. If a defective box is detected, the controller will automatically send a signal to the stacking section allowing the bundle to be diverted so that it may be hand picked from the bundle.
Corrugated Rejection Options Brochure | | |
|
Corrugated